Lunamoon Strong Base

STRONG BASE is a solid base that has properties similar to a gel.

Features:

• Strengthens nails and makes them hard.

• Self-levels very quickly.

• It has a medium-liquid consistency. Thanks to this, leveling can be done in a few seconds. 

• It has an acidity of 5–6 pH.

• It is hypoallergenic.

• May cause a feeling of warmth and burning on damaged nails (not on healthy nails).

• It is perfectly removed both by sawing and using liquid.

• It has a nice gloss. If you wipe off the stickiness, you can avoid covering it with a top coat.

• The basic rule of alignment: at the edge of the nail, the thickness should be 0.5 mm. 

• The lamp power for drying the base is 36–48 W. The lamp must be original. 

Application method: 

1. Withdrawal.

2. We do not file the nail shape or leave it 2 mm long, which we will remove after leveling.

3. Use a 220-grit file to file the nail without applying strong pressure from above, lifting the scales of the nail plate, or use a 100-grit buff.

4. Let's do a manicure.

5. If we work with removers, we wash our hands with soap after working with them.

6. Degrease the nail with Nail Prep LUNAmoon . We do two approaches. We use 4 napkins for this (1 napkin for 5 fingers). The first approach: wipe the surface of the nail. The second approach: take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.

7. We use a primer if desired, but if the base for the substrate has sufficient acidity, then it is not needed.

8. The Rubber Base LUNAmoon base coat is best applied with a flat gel brush. The movements should be rubbing. We draw all the sinuses of the nail and dry in the lamp for 60 seconds.

9. We erase the stickiness.

10. Level with Strong Base LUNAmoon . Cure in the lamp for 90 seconds.

11. File the shape after it has been smoothed out. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.

12. If the nail was thin, it may curl, so be sure to cut 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.

13. After filing, we erase the stickiness and cover with a thin layer of gel polish or camouflage base.

14. Cover with top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.